| |
|
| |
|
| |
|
| |
|
| |
|
| |
P/N
C333 3x3% CHEMGUARD AR-AFFF
|
 |
|
| |
|
|
| |
|
| |
|
|
|
| |
|
|
| |
| |
 |
 |
36-Gallon Mobile Cart
- Chemguard's designed-and-manufactured
mobile foam cart features a
36-gallon reinforced fiberglass
tank which is compatible with
any foam concentrate.
P/N
CMFC-1
36-
GALLON CART SYSTEM
Designed as a mobile cart system,
this unit holds 36 gallons of
foam concentrate and includes
our 95 GPM inline eductor and
SB95-P handline nozzle along
with 50' of 11/2" rubber-lined
single jacket fire hose making
this a very effective fire fighting
unit for flammable liquid fires
|
|
|
|
| |
|
|
|
|
|
| |
|
| |
CHEMGUARD'S
FOAM/WATER MONITORS
|
|
|
| |
|
|
| |
Chemguard's
manual and gear driven monitors are constructed
of corrosion resistant brass and are ideally
suited for harsh, corrosive environments such
as marine docks, process areas, and offshore
installations. They are operated in both horizontal
and vertical planes and are capable of flows
up to 5,000 GPM. Note: Units with larger flows
available by special order. |
|
| |
|
P/N
CM-1250M-3 and *CM-1250M-4
Chemguard's
Rattlers are low profile brass monitors
with a 3" waterway. These units
are capable of flows up to 1250 GPM,
adjustable in both the horizontal and
vertical planes. Stainless ball bearings
at all rotation joints with 3"
flange inlet and 21/2" male NST
discharge outlet. Vertical travel is
controlled by an adjustable hand wheel
with worm gear drive.
Available with 4" flange
inlet |
|
|
| |
|
|
| |
|
P/N CM-1250B-3S
and *CM-1250B-4S
The
Brahma series of industrial monitors are
manufactured with all-brass construction
and designed for harsh corrosive environments.
All
designed with 3" water way with water
flows up to 1250 GPM with a 3" inlet
and 21/2" male NST outlet. Stainless
ball bearings at all rotation joints.
Vertical travel is controlled by an adjustable
handbar.
Available with
4" flange inlet |
|
|
| |
|
|
| |
|
P/N CM-1250H-3
and *CM-1250H-4
The
CM-1250H industrial gear driven monitor
has 3" water way for up to 1250 GPM
flow with a 3" flange inlet and 21/2"
male NST outlet. Chemguard's dual gear
driven Brahma monitor is operated in both
vertical and horizontal planes by dual
worm gears with hand wheels.
Available with 4" flange
inlet |
|
|
|
|
|
| |
|
| |
VERTICAL
AND HORIZONTAL BLADDER TANKS
|
|
|
| |
|
|
| |
Chemguard's
Bladder Tanks are one component in a balance
pressure foam proportioning system. It requires
no external power other than water pressure
to ensure correct operation. Both vertical
and horizontal bladder tanks are designed
and constructed in accordance with the latest
revisions to ASME code. Proportioning is the
introduction of foam concentrate into a flowing
water stream to produce a foam solution. Chemguard
offers a variety of proportioning equipment
that will accurately accomplish this task
with various types of systems such as Bladder
tanks, balance pressure proportioning systems
and inline balance proportioning systems (ILBP's).
Vertical and Horizontal Bladder Tanks
-
Chemguard's
line of UL listed and FM approved vertical
and horizontal bladder tank systems are available
from 25 gallons to 2,500 gallons in the vertical
and 100 gallons to 6,000 gallons in the horizontal
style. These systems provide a dependable
and cost-effective foam fire protection for
a variety of flammable/combustible hazard
areas and because water is the primary operating
medium, they are easy to operate and maintain.
Bladder tanks are frequently used in small
aircraft hangers, warehouses, helicopter decks,
and storage facilities. When the tank is in
operation, water is applied to the outside
surface of the bladder and subsequently displaces
the foam concentrate, which is contained inside
the bladder, which then makes its way to the
proportioning device and then is injected
into the water stream. |
|
| |
|
|
- Bladder is manufactured in extremely
durable material which has a Mullen
bursting pressure in excess of 800
psi and constructed to conform to
the inside dimensions of the tank
- Tanks are supplied with brass trimmed
valves with Teflon seats
- All valves are labeled showing normal
working conditions
- All tanks are oversized to allow
for any thermal expansion of the foam
concentrate
- All tanks are certified and supplied
with a label identifying the type
of foam concentrate the system is
designed for and the percentage ratio
and tank size
- All tanks include the following
trim valve packages: tank shell drain/fill
valve; tank shell vent valve, bladder
vent valve and bladder drain/fill
valve
- Various options, such as coating,
sight glass, pre-piping, stainless
steel, insulated and heat-tracing
packages are available
- UL listed
- FM approved
|
|
|
| |
|
|
|
|
|
| |
|
| |
|
| |
|
| |
|
|
|
| |
|
|
|
|
| |
Also
referred to as eductors, Chemguard's
Line Proportioners present a simple,
cost effective method to proportion foam concentrate
and water at the proper percentage. They are
often utilized in a fixed foam storage and distribution
system, i.e. foam concentrate storage tanks
or atmospheric storage systems. Our full range
of these constant-flow devices includes 13 models
having flow rates from 60 GPM to 730 GPM, manufactured
in a corrosion resistant brass.
P/N CE95, CE240, CE420, CE550 &
CE730
|
|
| |
|
|
|
|
|
| |
|
| |
PROPORTIONING
CONTROLLERS
|
|
|
| |
|
|
| |
The
Chemguard (UL Listed) line of Proportioning
Controllers is used in conjunction with balance
pressure systems, such as bladder tanks, pump
skids, and foam pump-proportioning systems.
Manufactured in 5 standard models from 2 1/
2" to 8" allowing for flow ranges
between 40 and 5,500 GPM. |
|
| |
|
|
P/N CPC2.5, CPC3.0, CPC4.0,
CPC6.0, CPC8.0
- Proportioners are cast in ASTM-85-5-5-5-brass
- Chemguard's CPC2.5 is a 21/2"
threaded controller designed with
a 21/2" FNPT threaded inlet and
a 21/2" male NPT threaded outlet
- All 3", 4," 6", and
8" controllers are designed to
mount between two ANSI 150 lbs. pipe
flanges
- The Controller is clearly marked
with a flow direction arrow and label,
identifying the foam concentrate and
percentage ratio
- UL Listed
|
|
|
| |
|
|
|
|
|
| |
|
| |
|
|
|
| |
|
|
| |
|
|
Chemguard's
Foam Chambers are (UL Listed) type
2 discharge devices as defined by
NFPA11 which are designed to lessen
the submergence of the foam and deliver
the foam directly onto the surface
of flammable or combustible liquid.
The foam chambers are installed on
flammable liquid storage tanks just
below the roof joint, flow rates are
sized for the specific application.
Foam solution is supplied to the chamber
from outside the hazard area from
a fixed foam storage and proportioning
system or from a dry pipe semi-fixed
system which receives foam solution
from a mobile foam apparatus. Upon
entering the chamber the foam solution
is expanded and then discharged against
a deflector mounted inside the storage
tank. The deflector directs the foam
against the inside wall of the storage
tank, reducing the agitation of the
fuel
|
|
|
| |
P/N
FC2.5
Flow rate from 50 to 150 GPM
P/N FC3
Flow rate from 100 to 300 GPM
P/N FC4
Flow rate from 180 to 625 GPM
P/N FC6
Flow rate from 395 to 1,050 GPM |
- UL Listed
- Top of the chamber
has access for inspection of the vapor
seal
- Glass vapor
seal designed to break between 10
and 20 psi
- Chambers manufactured
in ASTMA36 carbon steel with a 304
stainless steel screen covering the
foam maker air inlets
- Choice of 2
styles of deflectors (split or solid)
|
|
|
| |
|
|
|
|
|
| |
|
| |
|
|
|
| |
|
|
| |
Chemguards
UL Listed Foam Makers are designed as an air aspirating
discharge device used principally for the protection
of dike and open floating roof storage tanks, rim
seal protection, or where low velocity foam streams
are desired. The foam maker is normally installed
in the line of a semi-fixed or fixed foam fire protection
system. |
|
| |
|
|
| |
|
|
|
|
| |
|
| |
HIGH
BACK PRESSURE FOAM MAKERS
|
|
|
| |
|
|
| |
Chemguard's
UL Listed High Back Pressure Foam Makers are designed
for subsurface injection and are suitable for use
with various types of foam solution systems, such
as bladder tanks, balanced pressure, foam pump systems,
ILBP's, and foam pumper trucks. Manufactured in
carbon steel, but stainless steel or brass can be
requested. |
|
| |
|
|
P/N CFM 70, 90, 250, 270, 1000
Available in flow rates from 60 to 1200
GPM
- Designed to produce expanded foam that
is introduced into cone roof storage tanks
by sub-surface injection, and for use on
hydrocarbon based fuels only, such as diesel,
kerosene and gasoline. The foam maker is
generally located outside the dike area
that surrounds the storage tanks and is
not recommend for use for tanks having a
floating roof.
- Expanded foam solution is delivered to
the burning fuel surface with minimum exposure
to heat and flame
- Piping and equipment is located at the
tank base and in areas not subject to damage
from heat, flame, or explosion
- UL Listed
|
|
|
| |
|
|
|
|
| |
|
|
